The Technology
Mounting and Housing
Using your original fixture, simply replace the existing ballast with our Driver. Once the HID bulb is removed, our LED Retro-Fit bulb screws into the same E-27 or E-40 Mogul Base receptacle. Close up the fixture. Truly as simple and quick as a bulb and ballast change.
Rotational
Easily rotated for alignment after installation, light can be directly angled and targeted, often times eliminating the need for side shields.
Lumen Output (Hot)
* ENVIRO I = 2,500
* ENVIRO 2= 5,000
* ENVIRO 3= 7,500
* ENVIRO 4=10,000
* ENVIRO 6=15,000
Efficiency
Total delivered lumens at 88 LPW (Lumens Per Watt) with an achievable efficacy of 95 LPW.
Higher power lamps are available.
Electrical
* UL1310, Class 2 compliant or UL8540 as appropriate.
* Drivers suitable for damp or dry locations.
* Housings and internal components are rated IP66 or IP67.
* Designed for indoor or outdoor applications:
* Operating from 45-60Hz +/- 3Hz AC from 90 volts to 305 volts.
* Each driver is an efficient switcher with a power factor of greater than 0.96 with
input current of less than 20% THD (Total Harmonic Distortion).
* Fluctuation of the line voltage has no visible effects on the luminous output.
* Each driver includes voltage surge protection to withstand high repetition noise transients while meeting emissions limits as set forth by the FCC Title 457, subpart B, section 15. 347-480 volt 50/60 Hz.